Compression Gauge :Ranges from 0 to 300 pounds.
(Power Mechanics - Tools) |
|
Spark Plug Gauge Set:Usually ranges from .020 to .040 thick wire sizes.
(Power Mechanics - Tools) |
|
Power Timing Light:Operates on 6 or 12 volt DC producing a blue-white flash for reading of timing mark.
(Power Mechanics - Tools) |
|
Torque Wrench:Comes in 1/4, 3/8, 1/2, and ¾ inch drives.
(Power Mechanics - Tools) |
|
Expansion or Adjustable Reamer: Used for reaming piston pin holes, king pin holes, holes for water pump bushings, valve stem guides and other precision reaming jobs.
(Power Mechanics - Tools) |
|
Impact Wrenches:Available in 3/8, 1/2 and ¾ inch drive.
(Power Mechanics - Tools) |
|
Impact Socket:A 6 point hardened socket designed for use with impact wrenches. Available in standard and deep syyles.
(Power Mechanics - Tools) |
|
Snap Ring Pliers:A tool install and remove internal or external snap rings. May come with interchangeable jaws.
(Power Mechanics - Tools) |
|
Ring Compressor:The ring compressor is used to compress piston rings when installing the piston in the cylinder head.
(Power Mechanics - Tools) |
|
Tachometer:Useful for checking speed on tools, machines, and engines.
(Power Mechanics - Tools) |
|
Air Pressure Type Grease Gun:It is portable but must be attached to an air line.
(Power Mechanics-Grease Guns And Fittings) |
|
Lever Type Grease Gun:It is filled by hand, cartridge, or from an air pressure gun.
(Power Mechanics-Grease Guns And Fittings) |
|
Zerk Grease Fitting:This fitting will withstand high pressure. The grease gun "snaps on" to the fitting.
(Power Mechanics-Grease Guns And Fittings) |
|